Your Cart is Empty
🍀 A Hundred Thousand Welcomes: A St. Patrick’s Day Door Hanger with Heart
St. Patrick’s Day decorating doesn’t have to be over-the-top to make an impact. In this tutorial, Essential Stencil ambassador Sharon Speiser of Sharon's Shed Signs & Designs shares a classic, layered door hanger design that feels festive, timeless, and easy to customize.
This project combines soft neutrals, bold green shamrocks, and elegant lettering to create a St. Patrick’s Day door hanger you’ll want to bring out year after year.
Table of Contents
🍀 St. Patrick’s Day Door Hanger
Materials Needed:
- 16” round wood board
- A Hundred Thousand Welcomes 16" Door Hanger Stencil
- Shamrock Pattern 12x16 + Bonus Stencil
- Stencil Brush Set | Pure Natural Bristle Brushes
- Painter’s tape
- Sponge brush
- Off-white or beige paint
- Green paint
- Black paint
- Paper towels or shop towels
Step-by-Step Instructions
Step 1: Divide the Board
Lay two strips of painter’s tape across your 16” round board to divide it into three equal sections.
Step 2: Paint the Top and Bottom Sections
Using a sponge brush, paint the top and bottom sections with an off-white or beige paint. Apply a second coat if needed and allow the paint to dry completely.
Step 3: Add the Shamrock Pattern
Once dry, position the Shamrock Pattern stencil over the top and bottom sections. Using a stencil brush and green paint, fill in the shamrocks. Let the paint dry, then carefully remove the tape.
Step 4: Paint the Middle Section
Reapply tape along the edges of the painted sections to protect them. Paint the center section with green paint, adding a second coat for a richer finish if desired.
Step 5: Stencil the Design
Once the board is completely dry, center the “A Hundred Thousand Welcomes” stencil in the middle section. Use black paint to fill the lettering. Remove the stencil and allow it to dry.
Step 6: Create the Shadow Effect
Reposition the stencil slightly lower to create a shadow effect. Fill only the words “Céad Míle Fáilte” using off-white paint.
Final Reveal
Helpful Tips:
- Offload your paint before stenciling to avoid bleed-through.
- Use light pressure and circular motions for crisp edges.
- Let each layer dry fully before taping or repositioning stencils.
- The shadow effect adds depth without overpowering the design.
Ready to create your own St. Patrick’s Day décor? Start with the A Hundred Thousand Welcomes Door Hanger Stencil and bring a little Irish charm to your front door.
Watch the Full Tutorial
Follow along with Sharon as she walks through each step of this layered St. Patrick’s Day door hanger from start to finish.
Leave a comment
Comments will be approved before showing up.