If you're brand new to stenciling or looking to brush up on technique, this tutorial by Sharon Hankins, Essential Stencil Ambassador, is the perfect place to start. You'll learn everything from prepping your board to avoiding fuzzy stencil lines with the offloading technique. Let’s dive into the basics and set you up for DIY success!
1. Tape down your stencil: Center your stencil on the board and tape all four sides. Add extra tape around detailed edges to prevent paint slips.
2. Load your brush and offload: Dip only the tips of your brush into the paint. Wipe excess off on the side of the paint pot, then offload onto cardboard or a coffee filter until the brush is nearly dry.
3. Apply with a dry brush technique: Use either a gentle swirling or stippling motion to apply paint through the stencil. Less is more!
4. Let dry and apply a second coat if needed: If your paint is translucent or your first layer is light, allow it to dry fully before applying another coat.
5. Reveal your masterpiece: Gently remove the stencil to reveal crisp, clean lines!
Ready to try your first stencil? Shop our full range of Reusable Stencils and Stencil Brushes.
Comments will be approved before showing up.
